NETGEAR ProSafe XS728T User Manual

Manage Device Security
227
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The entered password is displayed in dots. Passwords are up to 20 alphanumeric
characters in length, and are case sensitive.
8. In the Confirm Password field, enter the password again to confirm that you entered it
correctly.
The entered password is displayed in dots.
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Reset the Password to the Factory Default Value
You can reset the login password that is required for access to the switch to the factory
default value.
 To reset the login password for the web-based management interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security> Management Security > User Configuration > Change Password.
6. Select the Reset Password check box.
7. Click the Apply button.
The password is reset to the default password, which is password.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English