Configure Switching
135
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
If the address exists, the entry is displayed. An exact match is required.
View the MFDB Statistics
 To view the MFDB statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > Multicast > MFDB > MFDB Statistics.
Table 32. MFDB table information
Field Description
MAC Address The multicast MAC address for which you requested data.
VLAN ID The VLAN ID to which the multicast MAC address is related.
Component The component through which the entry was added to the Multicast Forwarding
Database. Possible values are IGMP Snooping, Static Filtering, and MLD Snooping.
Type The type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
Description The text description of this multicast table entry. Possible values are Management
Configured, Network Configured, and Network Assisted.
Interface The interfaces that are designated for forwarding (Fwd:) and filtering (Flt:) for the
selected address.
Forwarding Interfaces The resultant forwarding list is derived from combining all the forwarding interfaces
and removing the interfaces that are listed as the static filtering interfaces.
To Next Page
Loading...
Need help?
General