NETGEAR ProSafe XS728T User Manual

Manage Device Security
230
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
8. From he Accounting Mode menu, select to disable or enable RADIUS accounting on the
server.
The default is Disabled.
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable fields displayed on the page.
Configure a RADIUS Authentication Server on the Switch
Use the RADIUS Server Configuration page to view and configure various settings for a
RADIUS server configured on the switch.
Add a Primary or Secondary RADIUS Authentication Server to the Switch
 To add a primary or secondary RADIUS authentication server to the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Server Configuration.
Table 53. RADIUS Configuration information
Field Description
Current Server Address The address of the current server. This field is blank if no servers are
configured.
Number of Configuration Servers The number of configured RADIUS servers. The value can range from 0 to 8.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English