Configure Switching
158
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
• Forbidden. The interface cannot receive any multicast traffic on the VLAN, even if the
IGMP or MLD snooping process designated the interface as a member of a multicast
group.
• Excluded. The Multicast Forward All option is not enabled on the interface, that is,
the interface does not forward all multicast traffic on the VLAN. This is the default
state.
10. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
View, Search, and Manage the MAC Address Table
The Address Table (or MAC Address Table) contains information about unicast MAC
address entries for which the switch saved forwarding or filtering information. The transparent
bridging function uses this information in determining how to propagate a received frame.
Use the search function of the Address Table page to display information about the entries in
the table.
You can also add static entries to the Address Table and specify the period after which
dynamic MAC address entries that are not updated are automatically removed from the
Address Table.
From the Switching > Address Table > Advanced menu, you can access pages that are
described in the following sections:
• View and Search the MAC Address Table on page 158
• Change the Aging-Out Period of Dynamic MAC Addresses on page 160
• Add a Static MAC Address on page 160
• Remove a Static MAC Address on page 161
View and Search the MAC Address Table
 To view and search the MAC Address Table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
To Next Page
Loading...
Need help?
General