NETGEAR ProSafe XS728T User Manual

Configure System Information
48
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Time > DayLight Saving Configuration.
6. To refresh the page, click the Update button.
The following table displays the nonconfigurable daylight saving status information.
Configure DNS Settings
Use these pages to configure information about DNS servers that the network uses and how
the switch operates as a DNS client.
Table 9. Daylight Saving (DST) Status information
Field Description
DayLight Saving (DST) The Daylight Saving value, which is one of the following:
• Disable
• Recurring
• Recurring EU
• Recurring USA
• Non Recurring
Begins At Displays when the daylight saving time begins. This field is not
displayed when daylight saving time is disabled.
Ends At Displays when the daylight saving time ends. This field is not displayed
when daylight saving time is disabled.
Offset (in Minutes) The offset value in minutes.This field is not displayed when daylight
saving time is disabled.
Zone The zone acronym, if any was specified. This field is not displayed
when daylight saving time is disabled.
Daylight Saving (DST) in Effect Displays whether daylight saving time is in effect.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English