NETGEAR ProSafe XS728T User Manual

Configure Switching
136
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The following table describes the MFDB Statistics fields.
Configure Auto-Video
If the switch supports devices or applications running multicast traffic, the Auto-Video feature
simplifies IGMP snooping querier configuration, such as video surveillance cameras.
 To configure auto-video settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Multicast > Auto-Video.
The Auto-Video Configuration page displays.
6. Select one of the following radio buttons:
• Select the Disable radio button to globally disable Auto-Video administrative mode for
the switch.
• Select the Enable radio button to globally enable Auto-Video administrative mode for
the switch.
7. If you enable the feature, from the Auto-Video VLAN menu, select the ID of the VLAN that
must become the Auto-Video VLAN.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Table 33. MFDB Statistics information
Field Description
Max MFDB Table Entries The maximum number of entries that the Multicast Forwarding Database
table can hold.
Current Entries The current number of entries in the Multicast Forwarding Database table.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English