Configure Switching
94
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Each VLAN in a network is assigned an associated VLAN ID, which appears in the IEEE
802.1Q tag in the Layer 2 header of packets transmitted on a VLAN. An end station can omit
the tag, or the VLAN portion of the tag, in which case the first switch port to receive the
packet can either reject it or insert a tag using its default VLAN ID. A given port can handle
traffic for more than one VLAN, but it can support only one default VLAN ID.
You can define VLAN groups stored in the VLAN membership table. The switch supports up
to 256 VLANs. VLAN 1 is created by default and is the default VLAN of which all ports are
members.
From the Switching > VLAN > Advanced menu, you can access pages that are described in
the following sections:
• Configure VLAN Settings on page 94
• Configure VLAN Membership on page 97
• View VLAN Status on page 99
• Configure Port PVID Settings on page 100
• Configure MAC-Based VLAN Groups on page 102
• Manually Add Members to or Remove Them From a MAC-Based VLAN Group on
page 104
• Configure Protocol-Based VLAN Groups on page 105
• Manually Add Members to or Remove Them From a Protocol-Based VLAN Group on
page 107
• Configure GARP Switch Settings on page 108
• Configure GARP Ports on page 109
Configure VLAN Settings
The internal VLAN is reserved by a port-based routing interface and invisible to the end user.
Once these internal VLANs are allocated by the port-based routing interface, they cannot be
assigned to a routing VLAN interface.
Add a Internal VLAN
 To add an internal VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
To Next Page
Loading...
Need help?
General