Configure Routing
195
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
View or Clear the IPv6 Neighbor Table
 To view or clear the IPv6 Neighbor Table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routingï€ > IPv6 > Advanced > Neighbor Table.
6. Use the Search menu and field to search for IPv6 routes by IPv6 address or interface
number:
• Search by IPv6 address. Select IPv6 Address from the Search menu. Enter the
128-byte hexadecimal IPv6 address in four-digit groups separated by colons, for
example, 2001:231F:::1. Then click the Go button.
If the address exists, the entry is displayed. An exact match is required.
To Next Page
Loading...
Need help?
General