NETGEAR ProSafe XS728T User Manual

Manage Device Security
259
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
View the Client Summary
This page displays information about supplicant devices that are connected to the local
authenticator ports. If no active 802.1X sessions exist, the table is empty.
 To view the client summary:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Port Authentication > Advanced > Client Summary.
Operating Control
Mode
The control mode under which the port is actually operating. Possible values are as follows:
• ForceUnauthorized
• ForceAuthorized
• Auto
• N/A: If the port is in detached state, it cannot participate in port access control.
Reauthentication
Enabled
This field shows whether reauthentication of the supplicant for the specified port is allowed.
The possible values are TRUE and FALSE. If the value is TRUE, reauthentication occurs.
Otherwise, reauthentication is not allowed.
Port Status The authorization status of the specified port. The possible values are Authorized,
Unauthorized, and N/A. If the port is in detached state, the value is N/A because the port
cannot participate in port access control.
Table 56. Port summary (continued)
Field Description

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English