NETGEAR ProSafe XS728T User Manual

Configure Quality of Service
212
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Class Configuration.
The Class Configuration page displays.
6. Click the class name, which is a hyperlink.
The page on which you can change the class configuration displays.
7. Change the class configuration as needed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Delete an IPv4 DiffServ Class
 To delete an IPv4 DiffServ class:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Class Configuration.
The Class Configuration page displays.
6. Select the check box for the class name.
7. Click the Delete button.
The class is removed.
Configure an IPv6 DiffServ IPv6 Classes
The IPv6 class configuration feature extends the existing QoS ACL and DiffServ functionality
by providing support for IPv6 packet classification. An Ethernet IPv6 packet is distinguished
from an IPv4 packet by its unique Ethertype value, so all IPv6 classifiers include the
Ethertype field. An IPv6 access list serves the same purpose as its IPv4 counterpart.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English