Configure System Information
30
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
View and Configure the Switch Management Settings
This section describes how to display the switch status and specify some basic switch
information, such as the management interface IP address, system clock settings, and DNS
information. From the System > Management menu, you can access pages that are
described in the following sections:
• View or Define System Information and View Software Versions on page 30
• View the System CPU Status on page 32
• View USB Device Information on page 33
• IP Configuration on page 34
• IPv6 Network Configuration on page 36
• View the IPv6 Network Neighbor on page 37
• Configure the Time Settings on page 38
• Configure DNS Settings on page 48
• Configure Green Ethernet Settings on page 52
View or Define System Information and View Software
Versions
When you log in, the System Information page displays. Use this page to configure and view
general device information such as system name, location, and contact, general system
temperature, temperatures of the fans, and boot and software versions.
 To view or define system information and view software versions:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
To Next Page
Loading...
Need help?
General