Configure System Information
31
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
5. Define the following fields:
• System Name. Enter the name to identify this switch. You can use up to 255
alphanumeric characters. The default is blank.
• System Location. Enter the location of this switch. You can use up to 255
alphanumeric characters. The default is blank.
• System Contact. Enter the contact person for this switch. You can use up to 255
alphanumeric characters. The default is blank.
6. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the status information that the System Information page
displays.
Field Description
Serial Number The serial number of the switch.
System Object ID The base object ID for the switch’s enterprise MIB.
Date & Time The current date and time.
System Up Time The number of days, hours, minutes, and seconds since the last system
restart.
Base MAC Address Universally assigned network address.
IC Temp(C) Integrated circuit temperature in Celsius values.
Fan Status for Fans 1–4 The status of fan operations.
Model Name The model name of the switch.
To Next Page
Loading...
Need help?
General