Manage Device Security
247
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > HTTPS > Certificate Management.
The Certificate Management page displays.
6. Select the Delete Certificates radio button.
7. Click the Apply button.
The certificate is removed.
Configure Access Control
Access control allows you to configure an access control profile and set access rules. Access
control defines a single access control list (ACL, but in this case referred to as an access
profile) for management packets. This ACL can be composed of one or more access rules.
Creating an access control profile involves the following steps that are described in detail in
the sections that are mentioned in the steps:
1. Create an access profile (see Create an Access Profile on page 247).
2. Configure access rules for the access profile (see Add an Access Rule on page 248).
3. Activate the access profile (see Activate or Deactivate an Access Control Profile and
View the Profile Summary on page 251).
Create an Access Profile
Use the Access Profile Configuration page to set up a security access profile.
 To configure an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
To Next Page
Loading...
Need help?
General