NETGEAR ProSafe XS728T User Manual

Manage Device Security
251
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Activate or Deactivate an Access Control Profile and View the Profile
Summary
After you set up an access profile and add access rules to the profile, you must activate the
profile to be able to use it. (You do not need to activate the profile, but if you do not, you
cannot use it.)
If you want to make a change to an access rule for an access control profile, you must first
deactivate the access control profile.
 To activate or deactivate an access profile and view the profile summary:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
6. Take one of the following actions:
• To activate the access profile, select the Activate Profile radio button.
• To deactivate the access profile, select the Deactivate Profile radio button.
7. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
8. To refresh the page with the latest information about the switch, click the Update button.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English