NETGEAR ProSafe XS728T User Manual

Manage Device Security
238
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
5. Select Security > Management Security > TACACS+ > TACACS+ Server Configuration.
The TACACS+ Server Configuration page displays.
6. Select the check box for the server.
7. Modify the configuration for the selected accounting server.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Remove a TACACS+ Server From the Switch
 To a remove a TACACS+ server from the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > TACACS+ > TACACS+ Server Configuration.
The TACACS+ Server Configuration page displays.
6. Select the check box for the server.
7. Click the Delete button.
The RADIUS accounting server is removed.
Configure Authentication Lists
Use the Authentication List page to configure the default login list. A login list specifies one or
more authentication methods to validate switch or port access for the admin user.
Note: The admin user is assigned to a preconfigured list that is named
defaultList and that you cannot delete.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English