NETGEAR ProSafe XS728T User Manual

Get Started
27
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The Switch Information page displays.
5. Select Help > Support.
The Support page displays.
6. To access the NETGEAR support site for the switch, click the Apply button.
User Guide
The user manual (the guide you are now reading) is available at the NETGEAR download
center at downloadcenter.netgear.com.
 To access the user manual online from the web browser–based management
interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The Switch Information page displays.
5. Select Help > Online Help > User Guide.
The User Guide page displays.
6. To access the NETGEAR download center, click the Apply button.
7. Enter the model number of the switch.
8. Locate the user manual on the product support web page.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English