NETGEAR ProSafe XS728T User Manual

Hardware Specifications and Default Settings
370
ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728T and XS748T
Hardware Specifications and Switch Characteristics
Table 72. Hardware specifications and switch characteristics
Feature Description
XS728T interfaces 28 1000/10000 Mbps switching ports:
• Ports xg1–xg24 are copper ports (RJ45).
• Ports xg25–xg28 are fiber ports (SFP+).
XS748T interfaces 48 1000/10000 Mbps switching ports:
• Ports xg1–xg44 are copper ports (RJ45).
• Ports xg45–xg48 are fiber ports (SFP+).
Flash memory size 256 MB NAND
SDRAM size and type 512 MB DDR3
Switching capacity Non blocking full wire speed on all packet sizes
Forwarding method Store and forward
Packet forwarding rate 1G: 1,488,000 pps
10G: 14,880,000 pps
MAC addresses 16 K
Green Ethernet Automatic power-down on port when link is down, short cable mode and
EEE mode
Supported protocols and standards • TCP/IP
• UDP
• HTTP
• ICMP
• TFTP
• DHCP
• IEEE 802.1D
• IEEE 802.1 p
• IEEE 802.1Q
• IEEE802.3 1000BASE-T and 10GBASE-T
• IEEE802.3az (EEE)

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English