NETGEAR ProSafe XS728T User Manual

Configure Switching
89
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
From the Switching > LAG > Advanced menu, you can access pages that are described in
the following sections:
• Configure LAG Settings on page 89
• Configure LAG Membership on page 90
• Set the LACP System Priority on page 91
• Set the LACP Port Priority Settings on page 92
Configure LAG Settings
Use the LAG Configuration page to group one or more full-duplex Ethernet links to be
aggregated together to form a link aggregation group, which is also known as a port channel.
The switch treats the LAG as if it were a single link.
 To configure LAG settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> LAG > Basic > LAG Configuration.
6. Select one or more LAGs by taking one of the following actions:
• To configure a single LAG, select the check box associated with the LAG.
• To configure multiple LAGs with the same settings, select the check box associated
with each LAG.
• To configure all LAGs with the same settings, select the check box in the heading
row.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English