Monitor the System
326
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The System Information page displays.
5. Select Monitoring > Logs > Trap Logs.
The Trap Logs page displays.
The page shows the number of traps that occurred since the switch last rebooted.
6. To refresh the page with the latest information about the switch, click the Update button.
Configure Port Mirroring
Port mirroring selects the network traffic for analysis by a network analyzer. This is done for
specific ports of the switch. As such, many switch ports are configured as source ports and
one switch port is configured as a destination port. You can configure how traffic is mirrored
on a source port. Packets that are received on the source port, that are transmitted on a port,
or are both received and transmitted can be mirrored to the destination port.
The packet that is copied to the destination port is in the same format as the original packet
on the wire. This means that if the mirror is copying a received packet, the copied packet is
VLAN tagged or untagged as it was received on the source port. If the mirror is copying a
transmitted packet, the copied packet is VLAN tagged or untagged as it is being transmitted
on the source port.
 To specify one or more source ports and the destination port for port mirroring:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Mirroring > Port Mirroring.
To Next Page
Loading...
Need help?
General