NETGEAR ProSafe XS728T User Manual

Configure Switching
159
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The default password is password.
The System Information page displays.
5. Select Switching > Address Table > Address Table.
6. From the Search By menu, select one of the following options:
• VLAN ID. In the Search By field, enter a VLAN ID.
• Mac Address. In the Search By field, enter a MAC address as six 2-digit
hexadecimal numbers separated by colons, for example, 00:01:23:43:45:67.
• Interface. In the Search By field, enter an interface number.
7. Click the Go button.
If the searched value exists, the entry is displayed.
Total MAC Addresses field shows the total number of MAC addresses in the MAC
Address Table.
The following table describes the information in the MAC Address Table.
Table 41. MAC Address Table information
Field Description
VLAN ID The VLAN that is associated with the MAC address.
MAC Address The MAC address. The format is six 2-digit hexadecimal numbers that are
separated by colons, for example, 01:00:5e:45:67:89.
Interface The interface that is associated with the MAC address.
Status The type of the entry. Static entries were manually configured (see Add a Static
MAC Address on page 160). Dynamic entries were added to the table as a result
of a learning process or protocol.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English