NETGEAR ProSafe XS728T User Manual

Configure Switching
138
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The System Information page displays.
5. Select Switching> Multicast > IGMP Snooping > IGMP Snooping Configuration.
6. Next to IGMP Snooping Status, select whether IGMP snooping is enabled on the switch:
• Enable. The switch snoops all IGMP packets it receives to determine which
segments should receive packets directed to the group address.
• Disable. The switch does not snoop IGMP packets. This is the default setting.
7. Next to Block Unknown Multicast Addresses, select whether unknown multicast addresses
are blocked:
• Enable. Packets with unknown multicast MAC addresses in the destination field are
dropped.
• Disable. Packets with unknown destination multicast MAC addresses are flooded to
all interfaces in VLAN. This is the default setting.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
9. To refresh the page with the latest information about the switch, click the Update button.
The following table displays information about the global IGMP snooping status.
Table 34. IGMP snooping and IGMP snooping querier VLAN information
Field Description
VLAN IDs Enabled For IGMP
Snooping
The VLANs on which IGMP snooping is enabled. For more information, see
Configure IGMP Snooping for VLANs on page 139.
VLAN IDs Enabled For IGMP
Snooping Querier
The VLANs on which IGMP snooping querier is enabled. For more information,
see Configure MLD Snooping Querier VLAN Settings on page 151.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English