Omron YRC User Manual

A
Troubleshooting
A-13
2.705 : System error (OPTION)
Code : &H0002&H02C1
Meaning/Cause
Error occurred in software.
Action
Contact your distributor.
2.706 : System error (PATH)
Code : &H0002&H02C2
Meaning/Cause
Error occurred in software.
Action
Contact your distributor.
2.707 : AXSWEI over
Code : &H0002&H02C3
Meaning/Cause
The axis weight exceeds the input range.
Action
Set the axis weight within the input range.
2.708 : System error (Tracking)
Code : &H0002&H02C4
Meaning/Cause
Error occurred in software.
Action
Contact your distributor.
[ 3] Alarm related to the program file operation
3.201 : Too many programs
Code : &H0003 &H00C9
Meaning/Cause
A new program was created over 100 programs.
Action
Create a new program after deleting an unnecessary program. (Make a backup if necessary.)
3.202 : Program already exists
Code : &H0003 &H00CA
Meaning/Cause
A program with the same name of a registered program was created, copied, or renamed.
Action
Use a different program name to create, copy, or rename.
3.203 : Program doesn't exist
Code : &H0003 &H00CB
Meaning/Cause
A registered program of the specified name does not exist.
Action
Input a program name that is registered.
3.204 : Writing prohibited
Code : &H0003 &H00CC
Meaning/Cause
The specified program is write-protected.
Action
Make the program not write-protected.

Omron YRC Specifications

General

Brand	Omron
Model	YRC
Category	Controller
Language	English