Chapter 4 Advanced Configuration
© Polycom, Inc. 125 ViewStation FX/VS 4000 User’s Guide
• A ViewStation FX or VS4000 is in a telephone or video call.
• A telephone or video call has disconnected.
You can enter the following information on this screen:
• Enable SNMP—Enable SNMP in this field.
• Administrator Contact Name—Enter the name of the person
responsible for remote management of this system. The default
setting for this field is “IT Administrator.”
• SNMP Console IP Address—Enter the IP address of the
SNMP traps sent by the ViewStation FX or VS4000. Enter
0.0.0.0 in this field if any SNMP management console is capable
of receiving information from this agent.
• Location Name—Enter the location of the ViewStation FX or
VS4000. This field defaults to your ViewStation FX or VS4000
system name @ your country name.
• Community Name—Enter the SNMP management community
in which you want to enable this agent. The default setting for
this field is “Public”.
• System Description—This field displays the type of
videoconferencing device. You cannot edit this field.
Global Address Book
To use the features accessible from this screen, your organization
must use Polycom Global Management System software. You can
access the Global Address Book Server, Preferences, and Dialing
Rules 1 & 2 screens from the Global Address screen. The Gateway
Number and Private Net features are not available at this time.
To Next Page
Loading...
Need help?
General
