Chapter 1 Getting Started
ViewStation FX/VS 4000 User’s Guide 40 www.polycom.com
5. As the call connection approaches completion, the circular call
progress indicators on the lower left of the screen will change
from blue to green. Two call progress indicators will appear for
each available line.
If the call cannot connect, an error box will appear at the top
center of the screen. You can re-dial from the Video Phone
screen, where the number you entered will remain until it is
replaced or the system is turned off.
When the call connects, the party you are calling will appear in
the main window and near-site video will appear in a smaller
screen at the lower right. If you are using a dual-monitor
configuration, the party you are calling will appear on the main
monitor and you will appear on the second monitor.
Figure 1-29. ISDN Numbers and Speed Indicators
6. To end the call, press the CALL•HANG-UP button on the
remote, which takes you to the CALL•HANG-UP Choices
ISDN
Number
Fields
Speed
Indicator
To Next Page
Loading...
Need help?
General
