Chapter 1 Getting Started
© Polycom, Inc. 27 ViewStation FX/VS 4000 User’s Guide
When you have finished, review your entry then highlight the Save
icon and press the
button on the remote control.
Video Numbers
If you enabled RS-366 Dialing, the Video Numbers screen appears.
Enter the numbers that other sites can dial to call your ViewStation
FX or VS4000.
Figure 1-17. Video Numbers
When you have finished, review your entry then highlight the Save
icon and press the
button on the remote control.
If you disabled RS-366 Dialing, you are operating in direct connect
mode and the Video Numbers will not be displayed on the screen.
For additional information about V.35, see the V.35 Advanced
Configuration section of Chapter 4, Advanced Configuration.
PRI Network Interface Configuration Screens
If a PRI network T1 or E1 interface module is installed, the following
screens appear.
To Next Page
Loading...
Need help?
General
