3.4.7 LED/Conventional key test
(i) Pressing a conventional key causes the events shown below.
1. The buzzer sounds.
2. The associated LED lights (it goes out when you press the key again).
3. The associated LCD area changes color.
(ii) Pressing a touch panel key also causes the event shown below.
[ON]: Turns all the LEDs on.
[OFF]:Turns all the LEDs off.
[OK]: Terminates the test.
[NG]: Terminates the test.
NOTE:
If you do not press the conventional key shown in the [MSG:] area,
an error occurs. (Pressing the same key again will not cause an
error.)
NG
Messa
es the color and
LED is turned on and off.
2
31
5
64
8
97
0
4
#
Conventional key
to be pressed
Pressing this key turns all the
LEDs on.
Reverse display of the area
associated with the conventional key
Title
Pressing this key turns all the
LEDs off.
A172/A199 6-48 SM