2. MAJOR DIFFERENCES FROM THE BASE
COPIER’S FILM PROJECTOR (A998)
Enhancements for this FPU Purpose
The projector lamp light intensity has been
increased.
To improve the reproduction.
The material of the transparent parts of the
film strip/slide holders have been changed.
To improve the holders concerning attracting
dust particles, and reduce the appearance of
Newton ring patterns on copies.
The material of the guard unit has been
changed.
To reduce the attraction of dust particles to
the guard unit.
The height of the guard unit when placed on
the exposure glass has been changed.
To flatten a curled original (positive film) on
the exposure glass more effectively.
The height adjustment procedure has been
changed.
For easier servicing of the machine.
•
The exterior color has been changed. (New corporate identity color)
Refer to the A109 Service Manual A988 (SPU2) section for details
A172/A199 9-2 SM
To Next Page
Loading...
Need help?
General
