Siemens SIPROCESS GA700 Operating Instructions

Safety instructions
2
2.1 Requirements for safe use
In terms of safety, this device left the factory in perfect condition. In order to maintain this status
and to ensure safe operation of the device, observe these operating instructions and all the
information relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state and renew it, if necessary.
Symbol Description
Consult operating instructions
Hot surface
Dangerous electrical voltage
2.1.1 Laws and directives
Observe the test certi󹪝cation, provisions and laws applicable in your country during connection,
assembly and operation in the respectively valid version. These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC) (Canada)
Additional information is available at:
Certi󹪝cate (Page178)
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB 15

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English