12.3 Dismantling the device
Requirement
The device is decommissioned.
Procedure Wall-mounted device
1. Remove the fastening screws
2. Remove the wall-mounted device.
12.4 Disposing of the device
The device has to be fully emptied before the disposal. When disposing of the device observe the
statutory regulations applying in the respective country of use (for example guidelines on the
disposal of electronic waste).
Have the device fetched by a certied waste disposal company and disposed of in accordance
with the national regulations of the country of use.
12.5 Information on recycling
This product is from a environmentally-friendly manufacturer and complies with the directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
This product may contain substances that are potentially harmful to the environment if
disposed of improperly (landlls, incineration plants). It must therefore not be disposed of in
this way.
Therefore, please be environmentally conscious:
• Ensure that this product is recycled at the end of its life cycle through the relevant local
facilities!
• Observe the relevant regulations in your country.
Decommissioning, dismantling and disposal
12.5Information on recycling
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB 159
To Next Page
Loading...
Need help?
General
