EasyManuals Logo

Triumph Street Cup User Manual

Triumph Street Cup
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
Maintenance And Adjustment
104
Brake Pad Wear Compensation
Warning
If the brake lever or pedal feels soft
when it is applied, or if the lever/pedal
travel becomes excessive, there may
be air in the brake pipes and hoses or
the brakes may be defective.
It is dangerous to operate the
motorcycle under such conditions and
your authorised Triumph dealer must
rectify the fault before riding.
Riding with defective brakes may lead
to loss of motorcycle control and an
accident.
Disc and brake pad wear is
automatically compensated for and has
no effect on the brake lever or pedal
action. There are no parts that require
adjustment on the front and rear
brakes.
Disc Brake Fluid
Warning
Brake fluid is hygroscopic which means
it will absorb moisture from the air.
Any absorbed moisture will greatly
reduce the boiling point of the brake
fluid causing a reduction in braking
efficiency.
Because of this, always replace brake
fluid in accordance with scheduled
maintenance requirements.
Always use new brake fluid from a
sealed container and never use fluid
from an unsealed container or from
one which has been previously opened.
Do not mix different brands or grades
of brake fluid.
Check for fluid leakage around brake
fittings, seals and joints and also check
the brake hoses for splits, deterioration
and damage.
Always rectify any faults before riding.
Failure to observe and act upon any of
these items may cause a dangerous
riding condition leading to loss of
control and an accident.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Street Cup and is the answer not in the manual?

Triumph Street Cup Specifications

General IconGeneral
Engine Capacity900 cc
Max Torque80 Nm @ 3, 230 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Transmission5-speed
FrameTubular steel cradle
Rear SuspensionKYB twin shocks with adjustable preload, 120 mm rear wheel travel
Front BrakesSingle 310 mm disc, Nissin 2-piston floating caliper, ABS
Dry Weight200 kg
Bore x Stroke84.6 x 80 mm
Compression Ratio10.55:1
Final DriveChain
ClutchWet, multi-plate assist clutch
Front Tyre100/90-18
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Max Power55 PS (54 hp) @ 5, 900 rpm
ExhaustBrushed stainless steel twin silencers
Front Suspension41mm forks
Rear BrakesSingle 255 mm disc, Nissin 2-piston floating caliper, ABS
Seat Height780 mm
Fuel Tank Capacity12 L
SwingarmTwin-sided, tubular steel
Front Wheel18 x 2.75 in
Rear Wheel17 x 4.25 in
Instrument Display and FunctionsAnalogue speedometer, fuel gauge and gear position indicator
Width (Handlebars)740 mm
Rake25.5°

Related product manuals