EasyManuals Logo

Triumph Street Cup User Manual

Triumph Street Cup
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
Maintenance And Adjustment
113
Preload
Loading Condition Spring Preload
1
Solo Riding Standard 7. 0
Comfort (Softer) 7. 0
Sport (Firmer) 7. 0
Rider and Passenger 7. 0
1
Number of adjuster turns clockwise from the
fully anticlockwise position.
Damping
Loading Condition Rebound
Damping
2
Compression
Damping
2
Solo
Riding
Standard 5.0 5.25
Comfort
(Softer)
6.5 8.5
Sport
(Firmer)
2.0 2.0
Rider and Passenger 4.0 5.25
2
Number of adjuster turns anticlockwise from
the fully clockwise position.
Note:
This chart is only a guide. Setting
requirements may vary for rider
weight and personal preferences.
See the following pages for
information regarding suspension
adjustment.
The standard suspension setting
provides a comfortable ride and good
handling characteristics for general, solo
riding. The chart shows suggested
settings for the front suspension.
Front Suspension Preload
Adjustment - Thruxton R Only
ciys
1
1. Front suspension preload adjuster
The preload adjuster is located at the
bottom of the front suspension unit.
To change the preload:
Rotate the adjuster clockwise to
increase, or anticlockwise to decrease
using the adjustment tool located in the
right hand side panel.
Always count the number of turns from
the fully clockwise position.
Note:
The motorcycle is delivered from
the factory with the preload
adjuster set at the Standard
setting, as shown in the relevant
suspension chart (see page 112).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Street Cup and is the answer not in the manual?

Triumph Street Cup Specifications

General IconGeneral
Engine Capacity900 cc
Max Torque80 Nm @ 3, 230 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Transmission5-speed
FrameTubular steel cradle
Rear SuspensionKYB twin shocks with adjustable preload, 120 mm rear wheel travel
Front BrakesSingle 310 mm disc, Nissin 2-piston floating caliper, ABS
Dry Weight200 kg
Bore x Stroke84.6 x 80 mm
Compression Ratio10.55:1
Final DriveChain
ClutchWet, multi-plate assist clutch
Front Tyre100/90-18
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Max Power55 PS (54 hp) @ 5, 900 rpm
ExhaustBrushed stainless steel twin silencers
Front Suspension41mm forks
Rear BrakesSingle 255 mm disc, Nissin 2-piston floating caliper, ABS
Seat Height780 mm
Fuel Tank Capacity12 L
SwingarmTwin-sided, tubular steel
Front Wheel18 x 2.75 in
Rear Wheel17 x 4.25 in
Instrument Display and FunctionsAnalogue speedometer, fuel gauge and gear position indicator
Width (Handlebars)740 mm
Rake25.5°

Related product manuals