EasyManuals Logo

Triumph Street Cup User Manual

Triumph Street Cup
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Maintenance And Adjustment
93
Disposal of Used Engine Oil and Oil
Filters
To protect the environment, do not pour
oil on the ground, down sewers or
drains, or into watercourses. Do not
place used oil filters in with general
waste. If in doubt, contact your local
authority.
Oil Specification and Grade
Triumph's high performance fuel
injected engines are designed to use
10W/40 or 10W /50 semi or fully
synthetic motorcycle engine oil that
meets specification API SH (or higher)
and JASO MA, such as Castrol Power 1
Racing 4T 10W‑40 (fully synthetic)
engine oil, sold as Castrol Power RS
Racing 4T 10W‑40 (fully synthetic) in
some countries.
Refer to the chart below for the correct
oil viscosity (10W/40 or 10W/50) to be
used in your riding area.
-20
-10
0
10
20
30
40
-4
14
50
32
68
86
104
(°C)
(°F)
Ambient Temperature (°C)
Ambient Temperature (°F)
SAE 10W/50
SAE 10W/40
Oil Viscosity Temperature Range
Do not add any chemical additives to
the engine oil. The engine oil also
lubricates the clutch and any additives
could cause the clutch to slip.
Do not use mineral, vegetable, non‑
detergent oil, castor based oils or any oil
not conforming to the required
specification. The use of these oils may
cause instant, severe engine damage.
Make sure that no foreign matter enters
the crankcase during an engine oil
change or top up.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Street Cup and is the answer not in the manual?

Triumph Street Cup Specifications

General IconGeneral
Engine Capacity900 cc
Max Torque80 Nm @ 3, 230 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Transmission5-speed
FrameTubular steel cradle
Rear SuspensionKYB twin shocks with adjustable preload, 120 mm rear wheel travel
Front BrakesSingle 310 mm disc, Nissin 2-piston floating caliper, ABS
Dry Weight200 kg
Bore x Stroke84.6 x 80 mm
Compression Ratio10.55:1
Final DriveChain
ClutchWet, multi-plate assist clutch
Front Tyre100/90-18
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Max Power55 PS (54 hp) @ 5, 900 rpm
ExhaustBrushed stainless steel twin silencers
Front Suspension41mm forks
Rear BrakesSingle 255 mm disc, Nissin 2-piston floating caliper, ABS
Seat Height780 mm
Fuel Tank Capacity12 L
SwingarmTwin-sided, tubular steel
Front Wheel18 x 2.75 in
Rear Wheel17 x 4.25 in
Instrument Display and FunctionsAnalogue speedometer, fuel gauge and gear position indicator
Width (Handlebars)740 mm
Rake25.5°

Related product manuals