Triumph Street Cup User Manual

Cleaning And Storage
137
After Washing
Warning
Never wax or lubricate the brake discs.
Loss of braking power and an accident
could result. Clean the disc with a
proprietary brand of oil‑free brake disc
cleaner.
Remove the plastic bags and tape, and
clear the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes before motorcycle
operation.
Use a dry cloth or chamois leather to
absorb water residue. Do not allow
water to stand on the machine as this
will lead to corrosion.
Start the engine and run it for 5
minutes. Make sure that there is
adequate ventilation for the exhaust
fumes.
Care of Gloss Paintwork
Gloss paintwork should be washed and
dried as described above, then
protected using a high quality
automotive polish. Always follow the
manufacturer’s instructions and repeat
regularly to maintain your motorcycle’s
appearance.
Care of Matt Paintwork
Matt paintwork requires no greater care
than that already recommended for
high gloss paintwork.
• Do not use any polish or wax on
matt paintwork.
• Do not try and polish out scratches.
Aluminium Items - not
Lacquered or Painted
Items such as brake and clutch levers,
wheels, engine covers, engine cooling
fins, upper and lower yokes and throttle
bodies on some models must be
correctly cleaned to preserve their
appearance. Please contact your dealer
if you are unsure which components on
your motorcycle are aluminium parts
not protected by paint or lacquer, and
for guidance on how to clean those
items.
Use a proprietary brand of aluminium
cleaner which does not contain abrasive
or caustic elements.
Clean aluminium items regularly, in
particular after use in inclement
weather, where the components must
be hand washed and dried each time
the machine is used.
Warranty claims due to inadequate
maintenance will not be allowed.

Triumph Street Cup Specifications

General

Engine Capacity	900 cc
Max Torque	80 Nm @ 3, 230 rpm
Fuel System	Multipoint sequential electronic fuel injection
Transmission	5-speed
Frame	Tubular steel cradle
Rear Suspension	KYB twin shocks with adjustable preload, 120 mm rear wheel travel
Front Brakes	Single 310 mm disc, Nissin 2-piston floating caliper, ABS
Dry Weight	200 kg
Bore x Stroke	84.6 x 80 mm
Compression Ratio	10.55:1
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Front Tyre	100/90-18
Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Max Power	55 PS (54 hp) @ 5, 900 rpm
Exhaust	Brushed stainless steel twin silencers
Front Suspension	41mm forks
Rear Brakes	Single 255 mm disc, Nissin 2-piston floating caliper, ABS
Seat Height	780 mm
Fuel Tank Capacity	12 L
Swingarm	Twin-sided, tubular steel
Front Wheel	18 x 2.75 in
Rear Wheel	17 x 4.25 in
Instrument Display and Functions	Analogue speedometer, fuel gauge and gear position indicator
Width (Handlebars)	740 mm
Rake	25.5°