Triumph Street Cup User Manual

Accessories, Passengers And Loading
81
ACCESSORIES, PASSENGERS AND LOADING
Accessories and Loading
The addition of accessories and carriage
of additional weight can affect the
motorcycle's handling characteristics
causing changes in stability and
necessitating a reduction in speed. The
following information has been prepared
as a guide to the potential hazards of
adding accessories to a motorcycle and
carrying passengers and additional
loads.
Warning
Incorrect loading may result in an
unsafe riding condition leading to an
accident.
Always make sure that any loads
carried are evenly distributed on both
sides of the motorcycle. Make sure
that the load is correctly secured so
that it will not move around while the
motorcycle is in motion.
Evenly distribute the load within each
pannier (if fitted). Pack heavy items at
the bottom and on the inboard side of
the pannier.
Always check the load security
regularly (though not while the
motorcycle is in motion) and make sure
that the load does not extend beyond
the rear of the motorcycle.
Never exceed the maximum vehicle
loading weight of 210 kg (463 lb).
This maximum loading weight is made
up from the combined weight of the
rider, passenger, any accessories fitted
and any load carried.
Warning Continued
For models that have adjustable
suspension settings, make sure that
front and rear spring preload and
damping settings are suitable for the
loading condition of the motorcycle
(see page 114). Note the maximum
permissible payload for the panniers is
stated on a label inside the pannier.
Warning
Do not install accessories or carry
luggage that impairs the control of the
motorcycle. Make sure that you have
not adversely affected any lighting
component, road clearance, banking
capability (i.e. lean angle), control
operation, wheel travel, front fork
movement, visibility in any direction, or
any other aspect of the motorcycle's
operation.

Triumph Street Cup Specifications

General

Engine Capacity	900 cc
Max Torque	80 Nm @ 3, 230 rpm
Fuel System	Multipoint sequential electronic fuel injection
Transmission	5-speed
Frame	Tubular steel cradle
Rear Suspension	KYB twin shocks with adjustable preload, 120 mm rear wheel travel
Front Brakes	Single 310 mm disc, Nissin 2-piston floating caliper, ABS
Dry Weight	200 kg
Bore x Stroke	84.6 x 80 mm
Compression Ratio	10.55:1
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Front Tyre	100/90-18
Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Max Power	55 PS (54 hp) @ 5, 900 rpm
Exhaust	Brushed stainless steel twin silencers
Front Suspension	41mm forks
Rear Brakes	Single 255 mm disc, Nissin 2-piston floating caliper, ABS
Seat Height	780 mm
Fuel Tank Capacity	12 L
Swingarm	Twin-sided, tubular steel
Front Wheel	18 x 2.75 in
Rear Wheel	17 x 4.25 in
Instrument Display and Functions	Analogue speedometer, fuel gauge and gear position indicator
Width (Handlebars)	740 mm
Rake	25.5°