Setups
Xerox 4112/4127 Copier/Printer 9-15
System Administration Guide
Base Tone
For a button that toggles (the setting changes each time it is pressed), select the volume level
that sounds when the button is in its initial (first) position. This is the sound made when the
Interrupt button is released. Select from Loud, Normal, and Soft. To disable the sound, select
Off.
Machine Ready Tone
Set the volume level that sounds when the machine is ready to copy or print or after the
machine powers on. Select from Loud, Normal, and Soft. To disable the sound, select Off.
Note
It is possible to set targeted jobs, such as, Copy Jobs, Printer Jobs, Report Jobs, and so-on, from
the Job Complete Tone 1, Job Complete Tone 2, and Fault Tone screens.
Job Complete Tone 1
Select the volume level that sounds when the machine successfully completes the copy
cycle. Select from Loud, Normal, and Soft. To disable the sound, select Off.
Job Complete Tone 2
Select the volume level that sounds when the machine completes a job other than a copy
job. Select from Loud, Normal, and Soft. To disable the sound, select Off.
Fault Tone
Select the volume level that sounds when there is an error termination. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Auto Clear Alert Tone
Select the volume level that sounds when the automatic clear feature is enabled and it is 5
seconds before the machine automatically returns to the initial screen. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Alert Tone
Select the volume level that sounds when a fault, such as a paper jam occurs, and the fault is
left unattended. Select from Loud, Normal, and Soft. To disable the sound, select Off.
Out of Paper Warning Tone
Select the volume level that sounds when there is no paper in the paper tray and the job is left
unattended. Select from Loud, Normal, and Soft. To disable the sound, select Off.
Low Toner Alert Tone
Select the volume level that sounds when it is time to replace the drum toner cartridge. Select
from Loud, Normal, and Low. To disable the sound, select Off.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
