Xerox 4112 System Administration Guide

Setups
9-76 System Administration Guide
Xerox 4112/4127 Copier/Printer
Image Log Control
1. From the Common Settings screen, select Image Log Control.
2. Select the desired setting for the Image Log Control feature.
Each Image Log Control feature is discussed on page 9-76.
3. Select Save; you are returned to the Secure Watermark screen.
4. Repeat Steps 1-4, if necessary, for other Image Log Control features.
5. Select Close from the Image Log Control screen to return to the Common Settings screen.
Image Log Control
Select whether or not to set Image Log Control. Selections are Off or On.
Image Log Target
Set the Image Log Target for Copy Service, Print Service, Scan Service, or Fax Service.
Image Log Generation
Set the Assurance Level, Resolution, and Page Range.
Image Log Transfer
Set the Assurance Level and Auto Transfer.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English