Xerox 4112 System Administration Guide

Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer 3-11
System Administration Guide
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the
folder.
4. Click LPD.
5. Set the Port Number.
6. Select the Enable check box to enable the TBCP Filter.
7. Set the Connection Time-Out.
8. Set the Maximum Number of Sessions.
9. Reflect the values as the machine’s setting values.
a. Click the Apply button. A screen to enter the user name and password will be displayed.
b. Enter the System Administrator UserID and password into User Name and Password,
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
SNMP
This section describes the settings for SNMP.
Note
When using the CentreWare software to manage the machine by remote control, enable the
SNMP port.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a
computer on page 3-2).
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English