Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer 3-3
System Administration Guide
Notes
• If your network uses DNS (Domain Name System) and host name for the machine is
registered with the domain name server, you can access the device using a combination of
the host name and the domain name as the "Internet address." For example, if the host
name is "dcf1100", and the domain name is "mycompany.com", then the "Internet address"
becomes "dcf1100.mycompany.com."
• When specifying a port number, add ":" and a port number to the end of the Internet
address.
• If the "Login Setup" facility is enabled on the machine, enter the UserID and password in
User ID and Password. Please query the System Administrator about the UserID and
password.
• Enter an address beginning with "https" rather than "http" into the address bar in the
browser if encrypted communication is employed.
Example of the IP address entry
https://192.168.1.1/
Example of the Internet address entry
https://xxx.yyyy.zz.vvv/
Refer to Troubleshooting on page 10-1 if CentreWare Internet Services is not displayed.
Network setting items for CentreWare
Internet Services
CentreWare Internet Services enable you to alter various settings on the machine from a
computer.
Notes
• Confirm that the ports are enabled, if an item which you want to set is not displayed.
• When a setting is changed from CentreWare Internet Services while operating the control
panel, the setting items changed on the screen of the control panel are not displayed
Power-cycle the printer in this case.
The following network settings are discussed in this section:
•Ethernet
•EtherTalk
•SMB
•NetWare
•TCP/IP
•LPD
•SNMP
•IPP
• Port 9100
•LDAP
•E-mail
•HTTP
Note
Click Help at the top right of the CentreWare Internet Services screen for details on the setting
items.
Downloaded From ManualsPrinter.com Manuals