Xerox 4112 System Administration Guide

Using CentreWare Internet Services
3-8 System Administration Guide
Xerox 4112/4127 Copier/Printer
6. Set the Printer Server Name.
7. Set the Fileserver Name.
Note
Set this item only when the operation mode is in Bindery Service.
8. Set the Poling Interval.
9. Set the Number of Searches.
10. Set the Password.
a. Enter the Password.
b. Re-enter the same password in the Re-enter Password field.
11. Select the Enable check box to enable the TBCP Filter.
Note
The TBCP Filter checkbox will have a checkmark in it indicating that the TBCP Filter is
enabled.
12. Set the NDS Tree Name.
13. Set the NDS Context Name.
Note
Set this item only when the operation mode is in Directory Service.
14. Select a frame type from the Transport Protocol - Frame Type pull-down menu.
Note
Set this item only when the operation mode is in Directory Service.
15. Select the Enable check box to enable SLP - Active Discovery.
16. Reflect the values as the machine's setting values.
a. Click the Apply New Settings. A screen to enter the user name and password will be
displayed.
b. Enter the System Administrator UserID and password into User Name and Password,
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
d. Click Reboot. The machine will reboot and the setting value will be reflected.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English