6-4 Phaser 6250 Color Laser Printer Service Manual
Resetting NVRAM
Resetting NVRAM returns all the Image Processor Board NVRAM-stored
parameters to their factory default values. The print counts and the Adobe firmware
serial number are not affected by this reset. You can reset the PostScript NVRAM
using the Customer Menu or the Service Diagnostics Menu.
PostScript NVRAM Resets
Restore Factory Settings (Registration)
1. You can reset settings for color registration to the factory-default values.
2. From the Main Menu, highlight Troubleshooting and press OK.
3. Highlight Print Quality Problems and press OK.
4. Highlight Color Registration and press OK to display Color Registration Menu.
5. Highlight Restore Factory Settings and press OK to reset the color settings to
factory defaults.
Restore Factory Settings (Color)
1. You can reset settings for density and color balance to the factory-default values.
2. From the Main Menu, highlight Troubleshooting and press OK.
3. Highlight Print Quality Problems and press OK.
4. Highlight Calibrate Colors and press OK.
5. Highlight Restore Factory Settings and press OK to reset the color settings to
factory defaults
6. .Highlight Restore Factory Settings NOW and press OK to reset the color settings
to factory defaults.
Restore Previous Settings (Color)
You can return the color settings to the ones that existed before you saved the last
color balance adjustments.
1. From the Main Menu, highlight Troubleshooting and press OK.
2. Highlight Print Quality Problems and press OK.
3. Highlight Calibrate Colors and press OK.
4. Highlight Restore Previous Settings and press OK to restore the previous color
settings.
5. Highlight Restore Previous Settings NOW and press the OK to reset the color
settings to the previously set values.
To Next Page
Loading...
Need help?
General