7-2 Phaser 6250 Color Laser Printer Service Manual
Service Preventive Maintenance Procedure
Perform the following procedures whenever you check, service, or repair a printer.
Cleaning the printer, as outlined in the following Steps, assures proper operation of
the printer and reduces the probability of having to service the printer in the future.
The frequency of use, Average Monthly Print Volume (AMPV), type of media printed
on, and operating environemnt are factors in determining how critical cleaning the
machine is and how often it is necessary. Record the number of sheets printed.
Recommended Tools
â– Toner vacuum cleaner
â– Clean water
â– Clean, dry, lint-free cloth
â– Black, light protective bag
Cleaning
Caution
Never apply alcohol or other chemicals to any parts in the printer. Never use a
damp cloth to clean up toner. If you remove the Imaging Unit, place it in a light
protective bag or otherwise protect it as exposure to light can quickly degrade
performance and result in early failure.
1. Record number of sheets printed.
2. Print several sheets of paper to check for problems or defects.
3. Turn off the printer.
4. Remove the Toner Cartridges, Imaging Unit and both side covers before
cleaning.
5. Remove the front cover and clean the Fuser Fan with a brush or dry cloth to
remove excess dust.
6. Remove the rear cover and clean the Rear Fan with a brush or dry cloth to remove
excess dust.
7. Ensure that all cover vents are clean and free of obstructions.
8. Remove any debris or foreign objects from the Transfer Roller, Fuser Assembly,
Laser Unit and Imaging Unit.
9. Vacuum any loose toner from the interior of the printer using a Type II toner
vacuum only.
10. Open the left side door and clean up any toner inside.
To Next Page
Loading...
Need help?
General