Xerox PHASER 6250 Service Manual

1-12 Phaser 6250 Color Laser Printer Service Manual
Functional Specifications
Functional Specifications
Characteristic Specification
Printing process Imaging System - 4-tandem drums, electro-photographic system
using intermediate drum transfer rolls (IDTs).
Exposure System - Semiconductor laser, simultaneous scanning
by 4 beams.
Development System - Dry type 2-component developer.
Fusing System - Heat fusing, free nip-belt system.
Color medium Yellow, Magenta, Cyan, and Black Toner Cartridges
Resolution /
Addressability
Draft 600 x 600 dpi
Enhanced 2400 x 600 dpi (Default)
Photo 2400 x 600 dpi*
* Not available on the Phaser 6250B.
Operating Modes Print Mode: Print Engine capable of making prints immediately.
Ready Mode: 20 seconds from completion of a print.
Sleep/ Low Power/ Power Saver Mode: Entered after a specified
period of Print Engine inactivity since completion of the last print.
Continuuous
Operating Printing
Speed
ppm = pages per
minute
ipm = inches per
minute
Mode Paper Size / wt g/m
2
Simplex Duplex
600/2400 dpi Letter / A4
65 -130 26/24 ppm 15 ipm
100-163 13/12 ppm 7.8 ipm
160-216 13/12 ppm N/A
600/2400 dpi Legal
65 -130 19 ppm 16 ipm
100-163 10 ppm 7.8 ipm
160-216 10 ppm N/A
600/2400 dpi Envelope/Postcard
160-216 13 ppm N/A
600/2400 dpi Letter / A4 / OHP 8.6/8 ppm
Letter / A4
Photo Glossy Paper 8.6/8 ppm 5 ipm
100-200
Cleaning Cycle interval
for continuous printing
Print speed will be reduced if the print job is larger than the
cleaning cycle interval.
IU Print Volume Draft Enhanced Photo
Pages Pages Pages
0 - 5 K Pages 53 31 22
5 - 10 K Pages 35 26 18
10 - 15 K Pages 35 26 18
15 - 20 K Pages 35 26 18
20 - 25 K Pages 29 22 13
25 - 30 K Pages 29 22 13
>30 K Pages 29 22 13

Xerox PHASER 6250 Specifications

General

Brand	Xerox
Model	PHASER 6250
Category	Printer
Language	English