10-2 Phaser 6250 Color Laser Printer Service Manual
Plug/Jack Locator Maps
Use the table and maps in this section to locate specific Plug/Jack (P/J) connectors
within the printer.
To find the location of a P/J within the printer:
1. Locate the P/J connector number in the first column of the P/J Location table.
2. Locate the corresponding map and location number, such as M2-5, in the second
column.
3. With this information, go to the appropriate map (in this case, Map 2) and locate
item number 5.
Plug/Jack Locator Table
P/J
No. Map Connected to... Other end connected to...
11 3 Engine Control Board Motor Driver Board
12 3 Engine Control Board Motor Driver Board
13 3 Connects: Engine Control Board, Sub-HVPS, Fuser Harness
Assembly, Harness Assembly FRONT 1A and the CTD (ADC) Harness
Assembly.
14 3 Engine Control Board Image Processor Board
15 3 Engine Control Board Laser Unit
18 3 Engine Control Board Chute Assembly Registration
(Clutch and Sensor)
19 3 Engine Control Board Retard Housing Assembly
(Turn Clutch)
21 3 Engine Control Board HCF Main Harness Assembly
22 3 Engine Control Board Front Panel Harness Assembly
23 3 NC NC
24 3 Engine Control Board Fuser Harness, Temp/Hum Sensor
Harness Assembly
30 3 NC
31 3 NC (Test-Print)
32 3 Engine Control Board OHP Sensor
34 3 Engine Control Board CRUM Reader Harness
41 2 Motor Driver Board Engine Control Board
To Next Page
Loading...
Need help?
General