About the Tablet
12
• Capacitive display with 10-point touch input
There are three touch modes in Settings > Display > Advanced > Touch panel mode:
• Finger and Wet
• Finger and Glove
• Finger and Passive Stylus (default)
• Corning Gorilla Glass 3 for increased display damage resistance;
Capacitive Touch Panel with Multi-Touch operation with optional Active Digitizer
• Integrated 13 MP rear camera and 5 MP front camera
• Two USB 2.0 Type A ports, one USB Type-C port, and a microSD card slot
• Dual Nano SIM (4FF) port
• 9-Axis MEMS sensor (Accelerometer, eCompass, Gyroscope) and ambient light sensor
• Hot-swappable battery, 36 Whr standard battery or 98 Whr long-life battery packs
• Integrated 802.11a/g/n/ac, MuMIMO Wi-Fi, Bluetooth 5.0
• Android 8.1.0 Oreo operating system
• Integrated high-frequency NFC.
Optional Features
The following features are optional and must be ordered with the tablet at the time of purchase:
• A high-performance barcode scanner is available and is integrated into the handle of the XPAD L10 tablet.
• Integrated, active Wacom-digitizer display that provides precision pen input and hover features
See also Input Devices: Optional Modules on page 122. The items in that section must be ordered at time of
purchase because they must be factory installed.
Software Versions
To determine the current software versions:
1. Swipe down from the Status bar to open the Quick Settings bar.
2. Touch > System > About phone.
3. Scroll to view the following information:
• Model
• Android version
• Kernel version
• Build number
To determine the device serial number:
1. Touch System > About phone > Status.
2. Note the Serial number.
To Next Page
Loading...
Need help?
General
