To Next Page

To Previous Page

Wireless

6. In the Bypass proxy for text box, enter addresses for web sites that are not required to go through the proxy

server. Use a comma “,” between addresses. Do not use spaces or carriage returns between addresses.

7. Touch Connect.

8. Touch .

Configuring the Device to Use a Static IP Address

By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet

protocol (IP) address when connecting to a wireless network.

To configure the device to connect to a network using a static IP address:

1. In the network dialog box, touch a network.

2. Touch Advanced options.

3. Touch IP settings and select Static.

4. In the IP address text box, enter an IP address for the device.

5. If required, in the Gateway text box, enter a gateway address for the device.

6. If required, in the Network prefix length text box, enter the prefix length.

7. If required, in the DNS 1 text box, enter a Domain Name System (DNS) address.

8. If required, in the DNS 2 text box, enter a DNS address.

9. Touch Connect.

10. Touch .

Wi-Fi Preferences

Use the Wi-Fi preferences to configure advanced Wi-Fi settings. From the Wi-Fi screen scroll down to the bottom

of the screen and touch Wi-Fi preferences.

• Open network notification - When enabled, notifies you when an open network is available.

• Advanced - Touch to expand options.

• Additional settings - See Additional Settings.

• Install Certificates – Touch to install certificates.

• Network rating provider - Disabled (AOSP devices). To help determine what constitutes a good

Wi-Fi network, Android supports external Network rating providers that provide information about the

quality of open Wi-Fi networks. Select one of the providers listed or None. If none are available or

selected, the Connect to open networks feature is disabled.

• Wi-Fi Direct - Displays a list of devices available for a direct Wi-Fi connection.

• WPS Push Button - Touch to connect to a network using Wi-Fi Protected Setup (WPS) push button

method.

• WPS Pin Entry - Touch to connect to a network using Wi-Fi Protected Setup (WPS) pin entry method.

• MAC address - Displays the Media Access Control (MAC) address of the device when connecting to

Wi-Fi networks.

• IP address - Displays the IP address of the device when connecting to Wi-Fi networks.

Zebra L10 User Manual

Other manuals for Zebra L10