User's Manual 1150 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
configure voip > gateway
manipulation settings > swap-
tel-to-ip-phone-num
[SwapTel2IPCalled&CallingNu
mbers]
Global parameter enabling the device to swap the calling and
called numbers received from the Tel side (for Tel-to-IP calls).
You can also configure the functionality per specific calls, using Tel
Profiles (TelProfile_SwapTelToIpPhoneNumbers). For a detailed
description of the parameter and for configuring the functionality in
the Tel Profiles table, see ''Configuring Tel Profiles'' on page 428.
Note: If the functionality is configured for a specific Tel Profile, the
settings of the global parameter is ignored for calls associated with
the Tel Profile.
Add Prefix to Redirect Number
add-pref-to-redir-nb
[Prefix2RedirectNumber]
Defines a string prefix that is added to the Redirect number
received from the Tel side. This prefix is added to the Redirect
Number in the SIP Diversion header.
The valid range is an 8-character string. By default, no value is
defined.
Note: The parameter is applicable only to digital interfaces.
Add Number Plan and Type to
RPI Header
np-n-type-to-rpi-hdr
[AddTON2RPI]
Determines whether the TON/PLAN parameters are included in the
Remote-Party-ID (RPID) header.
 [0] No
 [1] Yes (default)
If the Remote-Party-ID header is enabled (EnableRPIHeader = 1)
and AddTON2RPI = 1, it's possible to configure the calling and
called number type and number plan using the Number
Manipulation tables for Tel-to-IP calls.
Source Manipulation Mode
configure voip > gateway
routing settings > src-
manipulation
[SourceManipulationMode]
Determines the SIP headers containing the source number after
manipulation:
 [0] = (Default) The SIP From and P-Asserted-Identity headers
contain the source number after manipulation.
 [1] = Only SIP From header contains the source number after
manipulation, while the P-Asserted-Identity header contains the
source number before manipulation.
Calling Name Manipulations IP-to-Tel Table
configure voip > gateway
manipulation calling-name-map-
ip2tel
[CallingNameMapIp2Tel]
Configures rules for manipulating the calling name (caller ID) in the
received SIP message for IP-to-Tel calls. This can include
modifying or removing the calling name. The format of this table ini
file parameter is as follows:
[ CallingNameMapIp2Tel ]
FORMAT CallingNameMapIp2Tel_Index =
CallingNameMapIp2Tel_ManipulationName,
CallingNameMapIp2Tel_DestinationPrefix,
CallingNameMapIp2Tel_SourcePrefix,
CallingNameMapIp2Tel_CallingNamePrefix,
CallingNameMapIp2Tel_SourceAddress,
CallingNameMapIp2Tel_RemoveFromLeft,
CallingNameMapIp2Tel_RemoveFromRight,
CallingNameMapIp2Tel_LeaveFromRight,
CallingNameMapIp2Tel_Prefix2Add,
CallingNameMapIp2Tel_Suffix2Add;
[ \CallingNameMapIp2Tel ]
For a detailed description of the table, see ''Configuring SIP Calling
Name Manipulation'' on page 510.
To Next Page
Loading...
Need help?
General
