Version 7.2 1151 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Parameter Description
Calling Name Manipulations Tel-to-IP Table
configure voip > gateway
manipulation calling-name-map-
tel2ip
[CallingNameMapTel2Ip]
Defines rules for manipulating the calling name (caller ID) for Tel-
to-IP calls. This can include modifying or removing the calling
name.
[ CallingNameMapTel2Ip ]
FORMAT CallingNameMapTel2Ip_Index =
CallingNameMapTel2Ip_ManipulationName,
CallingNameMapTel2Ip_DestinationPrefix,
CallingNameMapTel2Ip_SourcePrefix,
CallingNameMapTel2Ip_CallingNamePrefix,
CallingNameMapTel2Ip_SrcTrunkGroupID,
CallingNameMapTel2Ip_RemoveFromLeft,
CallingNameMapTel2Ip_RemoveFromRight,
CallingNameMapTel2Ip_LeaveFromRight,
CallingNameMapTel2Ip_Prefix2Add,
CallingNameMapTel2Ip_Suffix2Add;
[ \CallingNameMapTel2Ip ]
For a detailed description of the table, see ''Configuring SIP Calling
Name Manipulation'' on page 510.
Destination Phone Number Manipulation for IP-to-Tel Calls Table
Destination Phone Number
Manipulation for IP-to-Tel Calls
configure voip > gateway
manipulation
NumberMapIp2Tel2
[NumberMapIP2Tel]
This table parameter manipulates the destination number of IP-to-
Tel calls. The format of the ini file table parameter is as follows:
[NumberMapIp2Tel]
FORMAT NumberMapIp2Tel_Index =
NumberMapIp2Tel_ManipulationName,
NumberMapIp2Tel_DestinationPrefix,
NumberMapIp2Tel_SourcePrefix,
NumberMapIp2Tel_SourceAddress,
NumberMapIp2Tel_NumberType, NumberMapIp2Tel_NumberPlan,
NumberMapIp2Tel_RemoveFromLeft,
NumberMapIp2Tel_RemoveFromRight,
NumberMapIp2Tel_LeaveFromRight,
NumberMapIp2Tel_Prefix2Add, NumberMapIp2Tel_Suffix2Add,
NumberMapIp2Tel_IsPresentationRestricted;
[\NumberMapIp2Tel]
For a detailed description of the table, see ''Configuring
Source/Destination Number Manipulation'' on page 503.
configure voip > gateway
manipulation settings > prfm-ip-
to-tel-dst-map
[PerformAdditionalIP2TELDesti
nationManipulation]
Enables additional destination number manipulation for IP-to-Tel
calls. The additional manipulation is done on the initially
manipulated destination number, and this additional rule is also
configured in the manipulation table (NumberMapIP2Tel
parameter). This enables you to configure only a few manipulation
rules for complex number manipulation requirements (that
generally require many rules).
 [0] = Disable (default)
 [1] = Enable
Destination Phone Number Manipulation for Tel-to-IP Calls Table
Destination Phone Number
Manipulation for Tel-to-IP Calls
This table parameter manipulates the destination number of Tel-to-
IP calls. The format of the ini file table parameter is as follows:
To Next Page
Loading...
Need help?
General
