AudioCodes MediaPack MP-11 Series User Manual

User's Manual 1152 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
manipulation NumberMapTel2Ip
[NumberMapTel2IP]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_ManipulationName,
NumberMapTel2Ip_DestinationPrefix,
NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress,
NumberMapTel2Ip_NumberType, Numbe
rMapTel2Ip_NumberPlan,
NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight,
NumberMapTel2Ip_Prefix2Add, NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID, NumberMapTel2Ip_
SrcIPGroupID;
[\NumberMapTel2Ip]
For a detailed description of the table, see ''Configuring
Source/Destination Number Manipulation'' on page 503.
Source Phone Number Manipulation for IP-to-Tel Calls Table
Source Phone Number
Manipulation for IP-to-Tel Calls
configure voip > gateway
manipulation
SourceNumberMapIp2Tel
[SourceNumberMapIP2Tel]
The parameter table manipulates the source number for IP-to-Tel
calls. The format of the ini file table parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_ManipulationName,
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For a detailed description of the table, see ''Configuring
Source/Destination Number Manipulation'' on page 503.
configure voip > gateway
manipulation settings > prfm-ip-
to-tel-src-map
[PerformAdditionalIP2TELSourc
eManipulation]
Enables additional source number manipulation for IP-to-Tel calls.
The additional manipulation is done on the initially manipulated
source number, and this additional rule is also configured in the
manipulation table (SourceNumberMapIP2Tel parameter). This
enables you to configure only a few manipulation rules for complex
number manipulation requirements (that generally require many
rules).
 [0] = Disable (default)

[1]
= Enable
Source Phone Number Manipulation for Tel-to-IP Calls Table
Source Phone Number
Manipulation for Tel-to-IP Calls
configure voip > gateway
manipulation
SourceNumberMapTel2Ip
This table parameter manipulates the source phone number for
Tel-to-IP calls. The format of the ini file table parameter is as
follows:
[SourceNumberMapTel2Ip]
FORMAT SourceNumberMapTel2Ip_Index =
SourceNumberMapTel2Ip_ManipulationName,

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English