AudioCodes MediaPack MP-11 Series User Manual

Version 7.2 691 Mediant 1000B Gateway & E-SBC
User's Manual 35. Configuring Dial Plans
53([2-4]),A
531(4),B

For incoming calls with prefix number "321444", the rule with tag A is chosen and for
incoming calls with prefix number "32144", the rule with tag B is chosen:
321xxx,A
321,B

For incoming calls with prefix number "5324", the rule with tag B is chosen (prefix is
more specific for digit "4"):
532[1-9],A
532[2-4],B

For incoming calls with prefix number "53124", the rule with tag C is chosen (longest
suffix - C has three digits, B two digits and A one digit):
53([2-4]),A
53([01-99]),B
53([001-999]),C

For incoming calls with prefix number "53124", the rule with tag B is chosen (suffix is
more specific for digit "4"):
53([2-4]),A
53(4),B
Dial Plans are configured using two tables with parent-child type relationship:

Parent table: Dial Plan table, which defines the name of the Dial Plan. You can
configure up to 10 Dial Plans.

Child table: Dial Plan Rule table, which defines the actual dial plans (rules) per Dial
Plan. You can configure up to 2,000 dial plan rules in total (where all can be
configured for one Dial Plan or configured between different Dial Plans).
The following procedure describes how to configure Dial Plans through the Web interface.
You can also configure it through other management platforms:

Dial Plan table: ini file (DialPlans) or CLI (configure voip > sbc dial-plan)

Dial Plan Rule table: ini file (DialPlanRule) or CLI (configure voip > sbc dial-plan-rule)
 To configure Dial Plans:
1. Open the Dial Plan table (Setup menu > Signaling & Media tab > SBC folder > Dial
Plan).
2. Click New; the following dialog box appears:
Figure 35-2: Dial Plan Table - Add Dialog Box
3. Configure a Dial Plan name according to the parameters described in the table below.
4. Click Apply.

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English