Brother MFC-J2320 Service Manual

Confidential
2-66
4.2.8 Prints only single side of the paper when duplex-printing
User Check
- Set the driver settings to duplex-printing.
- Use recording papers in letter size or A4 size.
- Check if the recording papers are not overlapping each other. Shuffle the papers
thoroughly in the case of overlapping.
Step Cause Solution
1 Switching lever guide defective Replace the maintenance unit.
2 Main PCB defective Replace the main PCB ASSY.

Brother MFC-J2320 Specifications

General

Brand	Brother
Model	MFC-J2320
Category	All in One Printer
Language	English